Model Number: VZ-BCHS-1 | |
Full HD 1080p over coaxial cable, BNC connection | |
1/3” Progressive Scan / 2.1 Megapixel CMOS Sensor | |
Standard HD-SDI video interface - HD/3G-SDI, HDMI, CVBS (BNC) | |
No additional installation cost. (Compatible with existing coaxial cables) | |
NR (Digital Noise Reduction), ATW, Shutter Speed , BLC, DNR, WDR, Privacy, Motion, Digital Zoom, AGC, Gamma, Mirror, Flip, Defog | |
Minimum Illumination 0.1 Lux ( F1.2) | |
OSD & Color Bar Signal Available | |
DC 12V 400 mA (Consumption : 4.8W) |
Download VZ-BCHS-1 PDF Specifications Sheet
Imaging Sensor | 2.1 Megapixel CMOS Sensor |
Scanning System | 1/3” Progressive Scan |
Image Frame | NTSC, PAL Composite (1.0Vp-p ,75ohm) |
Electronic Shutter Speed | AUTO / MANUAL ( 1/30sec ~ 1/30,000sec ) |
S/N Ratio | More than 50dB |
HD-SDI Video Output Mode | 1080p / 25, 30, 50, 60fps |
1080i / 50, 60fps | |
720p (50, 60fps), HDMI, Color Bar Signal | |
Auto White Balance | AUTO / Pushing / Manual (3000K, 5000K, 8000K, R-Gain, B-Gain) |
Min. Illumination | 0.1Lux (F1.2, 50 IRE, AGC MAX) / DSS X4:0.01 Lux |
Digital Noise Reduction | DNR (Off / Low / Middle / High) |
Backlight Compensation | BLC (Off / On) |
Wide Dynamic-Range | WDR (Off / Low / Middle / High) |
SENS-UP | OFF / x2 / x3 / x4 |
AGC | Adjustable 0 ~ 10 |
Color Temp / R & B-Gain | Adjustable |
Language | English (Selectable) |
Mirror Image | MIRROR, FLIP (Off / On) |
NR | Support |
Digital Zoom | Support |
Privacy Masking | Support |
Motion Detection | Support |
HD/3G-SDI | 1 |
CVBS BNC | 1 |
HDMI | 1 |
DC 12V / Auto-Iris Connector | 1 |
Outline Dimension (W x H x D) inch | 2.32” x 2.32” x 4.02” |
(W x H x D) millimeter | 58.93 mm x 58.93 mm x 102.1 mm |
Net Weight | 0.44 lbs / 200g |
Construc on | Aluminium Alloy |
Operating Temp | 14 - 131°F / -10°C - 55°C |
Humidity | 0% to 90% Non-condensing |
Supplied Voltage | DC12V 400mA |
Power - Consumption | 4.8 W |
Warranty - Parts / Labor | 2 Years |
* Specifications subject to change without notice |