3G-SDI : 3Gb/sec 4:4:4 HD
3-Gbps (3G)-SDI, higher resolution (FHD) of picture quality required Serial Digital Interface (SDI) for 1080p. SMPTE 425M-AB, SMPTE 274M and Analog component input is compliant with 1080i (50/59.94/60 fps). Also, SMPTE 296M and Analog component comply 720p.
SDI-HDMI Cross-Conversion
Supports full SMPTE 425M-AB input signal conversion transparency from SDI to HDMI with test and measurement overlays.
2K Input Capability
2k content can be displayed on our digital monitors without the lose of HD signal by converting and downscaling the content.
Waveform Monitor
Display the Luma(Y), Chroma(Cb/Cr) and RGB Components of the input video signal as a form of waves. On screen display of video levels with respect to time, used to calibrate multiple camera setups and vertical blanking level and color burst.
Vector Scope Monitor
Display an X-Y plot of two signal, which can reseal details about the relationship between two signals. On screen display of chrominance information in Cb and Cr channels. Display can be opaque or solid against the visual display.
DSLR Scaling
To help cameramen to get the real recording image as large as possible, and get rid of the interference of half tone bars, the H2H-2 Cross Conversion offers “DSLR Scaling” function, which will cut the frame off and enlarge the real recording image to full screen.
SDI Embedded 16CH Audio Level Meter
SDI Embedded Audio Selected Out. Auto sensing to display three range meter of up to 16 channels.
Aspect Format Markers
4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1, 1.85:1, 4:3(On AIR) and 16:9 area, line, safety, corner marker on/off, blue/green/red/gray/black and white marker color option, marker mat transparency set - 0(transparent) to 7 (black) and center markers display.
Menu Jog Dial Control
5 rotational jog dials on the front of the monitor enables users to control all features. Volume, Bright, Contrast, Chroma and main select jog dials let user have convenience.
Histogram to help correct exposure
H2H-2 controller offers color histograms which are three separate histograms, one each for the R, G, B and Y channels. They help determine correct exposure in an instant.
Under Monitor Display
This model supports UMD (Under Monitor Display) function which displays Ancillary data at the foot of the screen.
Time Code
Time code (VITC or LTC) is an electronic signal which is used to identify a precise location in digital systems and on time-based media like audio or video tape.
Focus Assist to upgrade quality
H2H-2 controller is adapting to using a focus assist will make video shot with it better, while possibly making video shot without it slightly worse.
False Color to help with exposure
H2H-2 Cross Conversion provides a function of False color (or false colour) that refers to a group of color rendering methods used to display images in color which were recorded in the visible or non-visible parts of the electromagnetic spectrum. A false-color image is an image that depicts an object in colors that differ from those a photograph (a "true-color" image) would show.
RS-422 Monitor Control
Plug in your RS-422 connector to the back of the controller and communicate with ViewZ broadcast monitors.
Commercial Grade "A" Panels
Built to Run 24/7/365
2 Year Warranty
ViewZ monitors are built with commercial grade "A" panels which has superior color reproductions, low defect ratio, etc.
Built to run 24 hours a day, 7 days a week, 365 days a year.
ViewZ broadcast monitors are built to last backed by our 2 year factory warranty.